Learning Network Topology & Computer Network - Hi friend blogger, meet me again ramli siburian, in Berbagi Bersama. here I will share my little knowledge about computer network topology. probably most people already know what network topology, but for those who do not know, I will share knowledge. for those who have been curious what is a topology, let us refer to the discussion below
A. Introduction of Computer Network Topology
Computer Network Topology is a thing that explains the geometric relationship between the basic elements of the constituent network, namely:
-
Node
-
Link
-
Station
B. Types of Network Topology
The types of network topology is divided into several kinds, according to the data transmission medium. Topologo Computer Network is divided into 2, namely:
1. Topology physically
Describe how the cable, computer, and location of all computer network components are.
2. Topology logically
Explain how information or data flow and how computers can be connected in a computer networ
In each topology there are advantages and disadvantages. I will explain what are the advantages and disadvantages of computer topology
advantages and disadvantages of computer topology as follows:
codingplace
October 02, 2015
Riyyan seo
Banjarmasin, Kalimatan Selatan1. Topology physically
Describe how the cable, computer, and location of all computer network components are.
2. Topology logically
Explain how information or data flow and how computers can be connected in a computer networ
Computer network topology can be divided into 6 types, namely:
1. Topologi Bus
2. Topologi Ring
3. Topologi Star
4. Topologi Mesh
5. Topologi Hirarki
6. Topologi Linear
advantages and disadvantages of computer topology as follows:
1. Topologi Bus
This topology is a topology that is widely used in the use of coaxial cables mushroomed. By using a T-connector (Terminator 50 ohm) then the computer or other devices can be easily connected to each other.
In this topology is used single or central cable, where all workstions and servers are connected.
In this topology is used single or central cable, where all workstions and servers are connected.
Characteristics of topology bus :
1. Old technology, with single cable
2. Does not require active equipment
3. The influence of communication work between computers
4. At the end of the cable mounted 50 ohm connector
5. If the cable is disconnected, all connections are disconnected between computers
6. Difficult to troubleshoot if there is a problem on the network
Advantages and disadvantages of topology bus:
1. The addition of new workstations can be done easily without interrupting other workstations.
2. Layourt cable is simple because it has only single or central cable.
3. Density of traffic path data between computers.
4. Repeater required for long distance.
2. Topologi Ring
This topology is a series of dots that connect each other two points, which then form a circular path like a ring (ring). In the ring topology, each point / node serves as a repeater that will amplify signals along its circulation, meaning that each device works together to form this finger.
Characteristics of topology ring:
1. Each station in the network topology is a repeater capable of performing 3 functions, namely data
insertion, data reception, and data transfer.
2. This topology works almost the same as the concentrator as a central assembly of cable ends for
each connected computer.
Advantages and disadvantages of topology ring:
1. Easy to design and implement
2. It has better performance than bus topology, even for large data streams
3. Pelka to error, so that if there is a station problematic, then the network will be disrupted all
stations
4. Can occur collssion (two data packet mixed)
3. Topologi Star
This topology is a form of network topology in the form of convergence center to every station point. This topology includes the network topology with the middle medium. This topology network is quite difficult to install. Each computer has its own cable making it easy to find errors in the network.
Characteristics of topology star
1. Damage to one station has no effect on the other
2. High security level
3. Most flexible
4. If the central terminal is damaged, the entire station can not communicate
5. Wasted in the use of network cables
6. The network depends on the central terminal
Advantages and disadvantages of topology star:
1. wasteful of wires
2. Need special handling for network management
3.Centralized control (hub) becomes a very important element
4. Topologi Mesh
Topology Mesh is a form of relationship between devices where each device is connected directly to other devices that exist in the network.
As a result, in mesh topology each device can communicate directly with the dedicated device (dedicated links).
Characteristics of topology mesh:
1. The device communicates directly with the other dedicated device.
2. There is no initial planning when building a topology.
3. Very similar to the computer network berpasiskan function that is peer to peer.
Advantages and disadvantages of topology mesh:
1. Relationship dedicated link ensures the data directly sent to the destination station
2. Privacy and security on mesh topology more secure
3. Requires cable and port1 / 0
4. The number of cables used also requires the need for space that allows in the room where the
computers are located
As a result, in mesh topology each device can communicate directly with the dedicated device (dedicated links).
Characteristics of topology mesh:
1. The device communicates directly with the other dedicated device.
2. There is no initial planning when building a topology.
3. Very similar to the computer network berpasiskan function that is peer to peer.
Advantages and disadvantages of topology mesh:
1. Relationship dedicated link ensures the data directly sent to the destination station
2. Privacy and security on mesh topology more secure
3. Requires cable and port1 / 0
4. The number of cables used also requires the need for space that allows in the room where the
computers are located
5. Topologi Hierarchy
The hierarchical / tree topology (tree) is a karasteristic combination between star topology and bus topology. This topology consists of a collection of star topologies that are connected in a bus topology as a backbone or baackbone path.
Computers are connected to hubs, while other hubs are connected as backbone paths.
Characteristics of topology hierarchy:
1. This topology is a combination of star topology and bus topology
2. It has a rather complex design in its use
3. It has a cable center but has also a central terminal for use by the station
4. The development of this topology is wider
Advantages and disadvantages of topology hierarchy:
1. Centralized data, in a hierarchy so that becomes better and easier data management.
2. Controlled, easily developed into a wider network
3. The disadvantage, if the knot, or the central cable cable is lost, then the existing sub-network, will
work ineffectively
4. The way the network works is relatively slower
Computers are connected to hubs, while other hubs are connected as backbone paths.
Characteristics of topology hierarchy:
1. This topology is a combination of star topology and bus topology
2. It has a rather complex design in its use
3. It has a cable center but has also a central terminal for use by the station
4. The development of this topology is wider
Advantages and disadvantages of topology hierarchy:
1. Centralized data, in a hierarchy so that becomes better and easier data management.
2. Controlled, easily developed into a wider network
3. The disadvantage, if the knot, or the central cable cable is lost, then the existing sub-network, will
work ineffectively
4. The way the network works is relatively slower
6. Topologi Linear
Topology Linear (coherent) is usually called the sued bus topology, this layout includes a general layout. One main cable connects each connection point (computer) connected to a connector called a T connection and at the end must end with a terminator.
Characteristics of topology linear:
1. BNC cable connection is used to connect the T connecting cable
2. Pentabung T-BNC is used to connect cable to computer
3. BNC tube container is used to connect 2 BNC cables
4. The BNC terminator is used to mark the end of the bus topology
Advantages and disadvantages of topology linear:
1. Save cable
2. The layout is simple
3. Do not need central control
4. Disadvantages, detection and isolation of minor errors
5. High traffic data density
6. Data security is not guaranteed
7. Speed will decrease when the number of users increases
Thank you for visiting, may be useful for all of us, if there are wrong words please understand because I am still a beginner.
Thank you for visiting, may be useful for all of us, if there are wrong words please understand because I am still a beginner.
Introduction to Computer Networks - Hello everyone, I am Ramli Siburian from Berbagi Bersama to share a little knowledge for readers, now for the first material that I bring is Introduction to Computer Networks. without preamble let's read the article on Introduction to Computer Networks, see below
computer network classification is divided into several parts, namely:
Based on geography, computer network is divided into 3 parts, namely:
codingplace
October 02, 2015
Riyyan seo
Banjarmasin, Kalimatan Selatan
A. The History of Computer Networks
The history of computer networks stems from the birth of the concept of computer networks in 1940 at Bell's lab by a Harvard University research group led by Professor Howard Aiken. This research is known as ARPANET.
The ARPANET was developed by the Advanced Reseach Project Agency of the United States Department of Defense. This is a network that became the beginning of the creation of the Internet today that has been realized now.
computer networks is a system consisting of computer-komouter designed to be able to share resources (priter, CPU), communicate (email, instant messaging), and can access information (web browser).
The purpose of a computer network is the creation of a goal, every part of the computer network can request and provide services (service).
computer networks is a system consisting of computer-komouter designed to be able to share resources (priter, CPU), communicate (email, instant messaging), and can access information (web browser).
The purpose of a computer network is the creation of a goal, every part of the computer network can request and provide services (service).
B. Classification of Computer Networks
computer network classification is divided into several parts, namely:
· Geographically
· Based on Functions
· Based on Topology
· Based on Data Source Distribution
· Based on Data Trasmission MediaHere is an explanation of each classification of the
computer network
computer network
Based on geography, computer network is divided into 3 parts, namely:
- Local Area Network (LAN)
- Metropolitan Area Network (MAN)
- Wide Area Network (WAN)
Based on its function, computer network is divided into 2 parts, namely:
- Client-Server Network
- Peer to Peer Network
Based on topology, computer network is divided into 6 parts, namely:
- Bus Topology
- Star topology
- Mesh Topology
- Topology Tree
- Ring Topology
- Linear Opsions
Based on the source of data information, computer network is divided into 2 parts, namely:
- Centralized Network
- Distributed Network
Based on data transmission media, computer network is divided into 2 parts, namely:
- Wired Network
- Wireless Network
C. Benefits of Computer Networking
· As Sharing Resource
Which aims to make all the equipment, programs, and other peripherals can be utilized by every user in the network computer.
· As Equipment Development
With the computer network equipment development will be easier and at the same time can save costs, because every purchase of components
· As an Effective Communication Media
Computer networks can make communication between users to send important information or messages or teleconferences
· As Data Security
Through a computer network system, stored data will be more secure because it is stored in a central computer that can only be accessed by users who have access rights.
Thank you for visiting, may be useful for all of us, if there are wrong words please understand because I am still a beginner.








